Available HSS tooth forms

Tooth form Usage Tooth form shape Available for
CB

Chipbreaker tooth form is most effective for tube and profile cutting, particularly with PVD coated blades. It minimizes burr formation even at high cutting rates. It requires a stronger motor and allows the highest speeds. At high speeds the tube walls should not be too thin.

CB All types HSS, especially recommended for Power
HZ

Tooth pitch higher than 4mm. The 'HZ' tooth form, also known as form 'C', is most suitable for cutting solids and thick walled tubesA tooth pair is consisting of one roughening tooth (1/3 cutting with) and one finishing tooth (2x 1/3 cutting width). The roughening tooth is bevelled on both sides and is between 0,2 and 0,3 mm higher than the square finishing tooth.

HZ All types HSS
BW

Tooth pitch 4mm or smaller. All teeth of tooth form 'BW' are beveled alternatively. It is most suitable for cutting light gauge tubes and sections made of steel or non-ferrous metals.

BW All types HSS
B

Tooth form 'B' is used for cutting very thin walled pipes and profiles. It is best applied for thin saw blades

B  
AW

All teeth of tooth form 'AW' are bevelled alternatively. It is used for machining work, such as slotting, with thin saw blades.

AW  
A 'A' geometry is used for machining work, such as slotting, with thin saw blades. A  

 

CB tooth form HZ tooth form BW tooth form
RT Details _rood HZ Details _rood BW Details _rood

 

Product range

Our product range

Dealers

Find a dealer

Kinkelder Corporate site

Go to Kinkelder Corporate

© Kinkelder BV